KOMATSUExcavator Export
Home/Models/PC400-8
30-40t class

Used Komatsu PC400-8 excavator

This is a 30-40t class Komatsu machine for export from China. Price follows the exact unit, not the model name.

67000-69000USDindicative · per machine
30-40t classclass
Sourced to orderavailability
Worldwideshipping
Used Komatsu PC400-8 excavator for export from China

Komatsu PC400-8 is not the machine I use for every heavy job. It is better for buyers who need a large Komatsu excavator for normal earthmoving, road work, river cleaning, slope trimming, foundation excavation and loose material loading, but do not want the higher ownership pressure of a heavier quarry-position machine.

We usually keep around three PC400-8 machines in stock. Working hours may range from about 1,000 to 8,000 hours, but exact stock changes and should be confirmed before quotation. Paint condition may include original paint or full repainting. Many original-paint machines we handle may still keep around 80% undercarriage condition, while fully refurbished machines often have new undercarriage prepared for resale.

PC400-8 is attractive when the job site is narrow, muddy or needs frequent transfer. Many buyers use it for mountain-side working faces, river dredging, soft soil jobs, roadbed work and short-term earthwork projects. It can be easier to move and manage than PC450-8 when the job does not require continuous hard rock loading or 24-hour quarry production.

PC400-8 and PC450-8 should not be treated as the same machine. PC400-8 is better for general 40-ton class work, softer ground, lower transport pressure and projects using 30–35 ton dump trucks. PC450-8 should be checked separately when the buyer needs heavier structure, larger quarry loading ability, stronger stability with big rock and long-hour mining work.

PC400-8 commonly uses the SAA6D125E-5 engine family, but the actual engine plate must be confirmed on each machine. Before comparing price, confirm the real nameplate, engine plate, undercarriage, boom foot, counterweight, hydraulic response, structure repair marks and current working video.

Before quotation, ask for the exact working video. Check cold start, smoke, idle sound, hydraulic response, swing, travel, undercarriage, boom foot, arm welds, swing bearing area, leakage, nameplate and loading proof. A clean repaint or good-looking sticker cannot replace real machine inspection.

Which specs do we confirm on the machine?

Model Version
Confirm PC400-8 / PC400LC-8 / PC400-8R by real machine plate
Operating Weight
Confirm real weight, counterweight and current configuration
Engine
Common reference is SAA6D125E-5; confirm actual engine plate, cold start, smoke and leakage
Hydraulic System
Check pump response, boom, arm, bucket, swing and combined movement
Bucket and Loading
Confirm bucket size, bucket wear and matching dump truck size
Travel System
Check both-side travel, straight travel and final drive area
Undercarriage
Check rollers, sprocket, idler, track frame, track shoes and adjuster
Structure
Check boom foot, arm welds, swing bearing area and repair marks
Transport Size
Confirm width, height, loading method, port limits and transport plan

What do we check before we quote?

Engine

Cold start, smoke, idle stability, blow-by and engine plate.

Hydraulics

Boom, arm, bucket, combined movements and pump response.

Swing & travel

Both-side travel, straight walking and final-drive area.

Undercarriage & structure

Chain, shoes, rollers, sprocket, idler, pins and welds.

Where the PC400-8 fits

Best for
Heavy earthmoving, quarry support, aggregate yards and hard digging.
Check first
Undercarriage, hydraulics, engine smoke and structure — not paint or hours alone.
Before booking
Confirm transport width, height and the loading method for your port.

Related questions

How does the 30-40t class compare?

Indicative FOB — the exact price follows the unit, not the model name.

ModelWorking classIndicative FOBAvailability
PC300-730-40t class44000-46000USDSourced to order
PC300-830-40t class$51,000 FOB fromSourced to order
PC300-8M030-40t classon requestSourced to order
PC300-8M130-40t classon requestSourced to order
PC330-11M030-40t classon requestSourced to order
PC350-730-40t class38000-40000 USDSourced to order
PC350-830-40t class40000-44000 USDSourced to order
PC360-11M030-40t classon requestSourced to order
PC360-730-40t class50000-62000 USDSourced to order
PC360-830-40t classon requestSourced to order

Other 30-40t class Komatsu

FAQ

Do you have a used Komatsu PC400-8 in stock?
Availability changes weekly. We hold and source Komatsu PC400-8 units and send the latest exact-machine photos and video before quotation.
What does a used Komatsu PC400-8 cost?
Current PC400-8 indicatively starts around 67000-69000USD. Year, hours, undercarriage and hydraulic condition drive the final FOB number.
Which markets do you ship a Komatsu PC400-8 to?
We quote and ship worldwide, including Africa, the Middle East, Central Asia, South and South-East Asia and Latin America.
Next step

Looking for a specific Komatsu model?

Send the model, the job and your destination — we reply with what is in stock, that unit's own FOB price, photos and a working video.

  • Reply within one working day
  • FOB China, or a CIF quote for your port
  • Inspection evidence before any payment