KOMATSUExcavator Export
Home/Models/PC360-7
30-40t class

Used Komatsu PC360-7 excavator

This is a 30-40t class Komatsu machine for export from China. Price follows the exact unit, not the model name.

50000-62000 USDindicative · per machine
30-40t classclass
Sourced to orderavailability
Worldwideshipping
Used Komatsu PC360-7 excavator for export from China

Komatsu PC360-7 is not the machine I recommend for every heavy job. It is better for buyers who want a lower purchase cost, direct-injection repair logic, stronger tolerance for basic repair markets and a machine for rougher loading work without moving into the higher cost level of PC360-8.

We usually keep around five PC360-7 machines in stock. Current machines may range from about 2,000 to 8,000 working hours. Paint condition can vary: some machines keep original paint, some are fully repainted, and some only have small local paint repair. When current yard stock changes, we can also check suitable China-market PC360-7 options according to the buyer’s required year, hours and condition.

PC360-7 commonly uses the SAA6D114E direct-injection engine, but the actual engine plate must be confirmed on each machine. This older direct-injection setup is usually easier for markets with unstable fuel quality and limited electronic repair support. It is also easier for local mechanics who prefer older Komatsu machines and do not want complicated electronic diagnosis.

PC360-7 should not be confused with PC350-7. PC350-7 is easier for narrower sites, trenching, narrow mountain access and lighter general work. PC360-7 should be checked when the buyer needs heavier undercarriage support, stronger loading confidence and a machine mainly for quarry, sand yard or repeated truck loading work.

I do not recommend PC360-7 for buyers who need stricter import acceptance, lower fuel use, smoother combined movement, cleaner resale image or long-term heavy-duty rental. In those cases, PC360-8 should be checked separately. PC360-7 is mainly for lower-budget heavy work, short project cycles and markets where simple repair matters more.

Before quotation, ask for the exact working video. Check cold start, smoke, hydraulic response after warming up, swing, travel, undercarriage, boom foot, arm, bucket linkage, welding marks, machine plate and loading proof. A lower price is not a good deal if the hydraulic system, structure or undercarriage is tired.

Which specs do we confirm on the machine?

Model Version
Confirm PC360-7 / PC360LC-7 by real machine plate
Operating Weight
Confirm by bucket, boom, arm, counterweight and track shoes
Engine
Common reference is SAA6D114E; confirm actual engine plate, cold start, smoke, idle stability and leakage
Hydraulic System
Test boom, arm, bucket, swing, pump response and hot-machine movement
Swing System
Check swing noise, looseness, brake response and swing area
Travel System
Check straight travel, turning strength and final drive area
Undercarriage
Check chain, rollers, sprocket, idler, shoes, track frame and adjuster
Structure
Check boom foot, arm, bucket linkage, weld marks and pin looseness
Transport Size
Confirm width, height, loading method and destination limits

What do we check before we quote?

Engine

Cold start, smoke, idle stability, blow-by and engine plate.

Hydraulics

Boom, arm, bucket, combined movements and pump response.

Swing & travel

Both-side travel, straight walking and final-drive area.

Undercarriage & structure

Chain, shoes, rollers, sprocket, idler, pins and welds.

Where the PC360-7 fits

Best for
Heavy earthmoving, quarry support, aggregate yards and hard digging.
Check first
Undercarriage, hydraulics, engine smoke and structure — not paint or hours alone.
Before booking
Confirm transport width, height and the loading method for your port.

Related questions

How does the 30-40t class compare?

Indicative FOB — the exact price follows the unit, not the model name.

ModelWorking classIndicative FOBAvailability
PC300-730-40t class44000-46000USDSourced to order
PC300-830-40t class$51,000 FOB fromSourced to order
PC300-8M030-40t classon requestSourced to order
PC300-8M130-40t classon requestSourced to order
PC330-11M030-40t classon requestSourced to order
PC350-730-40t class38000-40000 USDSourced to order
PC350-830-40t class40000-44000 USDSourced to order
PC360-11M030-40t classon requestSourced to order
PC360-7 this page30-40t class50000-62000 USDSourced to order
PC360-830-40t classon requestSourced to order

Other 30-40t class Komatsu

FAQ

Do you have a used Komatsu PC360-7 in stock?
Availability changes weekly. We hold and source Komatsu PC360-7 units and send the latest exact-machine photos and video before quotation.
What does a used Komatsu PC360-7 cost?
Current PC360-7 indicatively starts around 50000-62000 USD. Year, hours, undercarriage and hydraulic condition drive the final FOB number.
Which markets do you ship a Komatsu PC360-7 to?
We quote and ship worldwide, including Africa, the Middle East, Central Asia, South and South-East Asia and Latin America.
Next step

Looking for a specific Komatsu model?

Send the model, the job and your destination — we reply with what is in stock, that unit's own FOB price, photos and a working video.

  • Reply within one working day
  • FOB China, or a CIF quote for your port
  • Inspection evidence before any payment