KOMATSUExcavator Export
Home/Models/PC350-8
30-40t class

Used Komatsu PC350-8 excavator

This is a 30-40t class Komatsu machine for export from China. Price follows the exact unit, not the model name.

40000-44000 USDindicative · per machine
30-40t classclass
Sourced to orderavailability
Worldwideshipping
Used Komatsu PC350-8 excavator for export from China

Komatsu PC350-8 is the PC350 machine I show first when the buyer wants a newer 35-ton excavator with smoother combined movement, lower fuel use, wider export acceptance and better long-term resale than an older low-budget machine. It fits earthmoving, truck loading, road work, rental fleets, infrastructure jobs and contractors who plan to use the machine for more than a short project.

We usually have around one or two PC350-8 machines to check. Many units are around 500 to 3,000 working hours, but the exact year, hours, paint, undercarriage, hydraulic condition and price must follow the current machine. Because this is a large excavator, the machine should never be judged only by hour meter or paint.

PC350-8 commonly uses the SAA6D114E-3 high-pressure common-rail engine, but the actual engine plate must be confirmed on each machine. This engine setup helps with fuel control and export acceptance, but it also needs better fuel filtration and maintenance discipline than older direct-injection machines.

PC350-8 is a better direction for buyers who care about fuel cost, smoother hydraulic coordination, long-term rental value and wider export use. It is more suitable for markets where Komatsu -8 series machines are already accepted, import requirements are stricter, and local mechanics can handle electronic fault diagnosis, fuel filtration maintenance and newer Komatsu system checks.

I do not recommend PC350-8 for every buyer. If local repair support is weak, fuel quality is unstable, or the project only needs a lower-budget machine for rough short-term work, PC350-7 can be checked separately. PC350-7 may be easier for old-style repair markets, but PC350-8 is stronger when long-term operating cost and resale value matter more.

Before quotation, ask for the exact working video. Check cold start, smoke, hydraulic response, swing, travel, undercarriage, boom foot, arm, bucket linkage, welding marks, machine plate and loading proof. On a used PC350-8, low hours are helpful, but working video and inspection details decide the real value.

Which specs do we confirm on the machine?

Model Version
Confirm PC350-8 / PC350LC-8 by real machine plate
Operating Weight
Confirm by bucket, boom, arm, counterweight and track shoes
Engine
Common reference is SAA6D114E-3; confirm actual engine plate, cold start, smoke, idle stability and leakage
Hydraulic System
Test boom, arm, bucket, swing and combined movement
Swing System
Check swing noise, looseness, brake response and swing area
Travel System
Check straight travel, turning strength and final drive area
Undercarriage
Check chain, rollers, sprocket, idler, shoes, track frame and adjuster
Structure
Check boom foot, arm, bucket linkage, weld marks and pin looseness
Transport Size
Confirm width, height, loading method and destination limits

What do we check before we quote?

Engine

Cold start, smoke, idle stability, blow-by and engine plate.

Hydraulics

Boom, arm, bucket, combined movements and pump response.

Swing & travel

Both-side travel, straight walking and final-drive area.

Undercarriage & structure

Chain, shoes, rollers, sprocket, idler, pins and welds.

Where the PC350-8 fits

Best for
Heavy earthmoving, quarry support, aggregate yards and hard digging.
Check first
Undercarriage, hydraulics, engine smoke and structure — not paint or hours alone.
Before booking
Confirm transport width, height and the loading method for your port.

Related questions

How does the 30-40t class compare?

Indicative FOB — the exact price follows the unit, not the model name.

ModelWorking classIndicative FOBAvailability
PC300-730-40t class44000-46000USDSourced to order
PC300-830-40t class$51,000 FOB fromSourced to order
PC300-8M030-40t classon requestSourced to order
PC300-8M130-40t classon requestSourced to order
PC330-11M030-40t classon requestSourced to order
PC350-730-40t class38000-40000 USDSourced to order
PC350-8 this page30-40t class40000-44000 USDSourced to order
PC360-11M030-40t classon requestSourced to order
PC360-730-40t class50000-62000 USDSourced to order
PC360-830-40t classon requestSourced to order

Other 30-40t class Komatsu

FAQ

Do you have a used Komatsu PC350-8 in stock?
Availability changes weekly. We hold and source Komatsu PC350-8 units and send the latest exact-machine photos and video before quotation.
What does a used Komatsu PC350-8 cost?
Current PC350-8 indicatively starts around 40000-44000 USD. Year, hours, undercarriage and hydraulic condition drive the final FOB number.
Which markets do you ship a Komatsu PC350-8 to?
We quote and ship worldwide, including Africa, the Middle East, Central Asia, South and South-East Asia and Latin America.
Next step

Looking for a specific Komatsu model?

Send the model, the job and your destination — we reply with what is in stock, that unit's own FOB price, photos and a working video.

  • Reply within one working day
  • FOB China, or a CIF quote for your port
  • Inspection evidence before any payment