KOMATSUExcavator Export
Home/Models/PC350-7
30-40t class

Used Komatsu PC350-7 excavator

This is a 30-40t class Komatsu machine for export from China. Price follows the exact unit, not the model name.

38000-40000 USDindicative · per machine
30-40t classclass
Sourced to orderavailability
Worldwideshipping
Used Komatsu PC350-7 excavator for export from China

Komatsu PC350-7 is not the PC350 machine I recommend to every buyer. It is better for customers who want a lower-budget 35-ton excavator with simpler repair logic, strong digging ability and easier local workshop support. For rough earthwork, quarry support, stone yard loading, short-term projects and markets with basic repair conditions, a clean PC350-7 can still make strong business sense. But hot-machine hydraulic speed, pump response and undercarriage condition must be checked carefully.

We usually keep around four PC350-7 machines in stock. Many available units are around 3,000 to 8,000 working hours, but the exact year, hours, paint, undercarriage, hydraulic condition and price must follow the current machine. On an older large excavator, hour meter and paint are only references. Working video, undercarriage and structure condition matter more.

PC350-7 commonly uses the SAA6D114E direct-injection engine, but the actual engine plate must be confirmed on each machine. This older direct-injection setup is usually easier to accept in markets with unstable fuel quality and limited electronic repair support. It is also easier for local mechanics who prefer older Komatsu machines.

I do not recommend PC350-7 for every market. If the buyer needs lower fuel use, smoother combined movement, stricter import compliance, long-term rental value or better resale image, PC350-8 should be checked separately. PC350-7 is mainly for buyers who care more about lower purchase cost, simple repair and rough working ability.

Before quotation, ask for the exact working video. Check cold start, smoke, hydraulic response, swing, travel, undercarriage, boom foot, arm, bucket linkage, welding marks, machine plate and loading proof. A cheap PC350-7 is not a good deal if the hydraulic system, structure or undercarriage is tired.

Final Komatsu PC350-7 specs should follow the current machine, machine plate and actual configuration. PC350-7 weight, bucket size, track shoe width, transport size, boom and arm setup may vary by machine condition and export preparation.

Which specs do we confirm on the machine?

Model Version
Confirm PC350-7 / PC350LC-7 by real machine plate
Operating Weight
Confirm by bucket, boom, arm, counterweight and track shoes
Engine
Common reference is SAA6D114E; confirm actual engine plate, cold start, smoke, idle stability and leakage
Hydraulic System
Test boom, arm, bucket, swing and combined movement
Swing System
Check swing noise, looseness, brake response and swing area
Travel System
Check straight travel, turning strength and final drive area
Undercarriage
Check chain, rollers, sprocket, idler, shoes, track frame and adjuster
Structure
Check boom foot, arm, bucket linkage, weld marks and pin looseness
Transport Size
Confirm width, height, loading method and destination limits

What do we check before we quote?

Engine

Cold start, smoke, idle stability, blow-by and engine plate.

Hydraulics

Boom, arm, bucket, combined movements and pump response.

Swing & travel

Both-side travel, straight walking and final-drive area.

Undercarriage & structure

Chain, shoes, rollers, sprocket, idler, pins and welds.

Where the PC350-7 fits

Best for
Heavy earthmoving, quarry support, aggregate yards and hard digging.
Check first
Undercarriage, hydraulics, engine smoke and structure — not paint or hours alone.
Before booking
Confirm transport width, height and the loading method for your port.

Related questions

How does the 30-40t class compare?

Indicative FOB — the exact price follows the unit, not the model name.

ModelWorking classIndicative FOBAvailability
PC300-730-40t class44000-46000USDSourced to order
PC300-830-40t class$51,000 FOB fromSourced to order
PC300-8M030-40t classon requestSourced to order
PC300-8M130-40t classon requestSourced to order
PC330-11M030-40t classon requestSourced to order
PC350-7 this page30-40t class38000-40000 USDSourced to order
PC350-830-40t class40000-44000 USDSourced to order
PC360-11M030-40t classon requestSourced to order
PC360-730-40t class50000-62000 USDSourced to order
PC360-830-40t classon requestSourced to order

Other 30-40t class Komatsu

FAQ

Do you have a used Komatsu PC350-7 in stock?
Availability changes weekly. We hold and source Komatsu PC350-7 units and send the latest exact-machine photos and video before quotation.
What does a used Komatsu PC350-7 cost?
Current PC350-7 indicatively starts around 38000-40000 USD. Year, hours, undercarriage and hydraulic condition drive the final FOB number.
Which markets do you ship a Komatsu PC350-7 to?
We quote and ship worldwide, including Africa, the Middle East, Central Asia, South and South-East Asia and Latin America.
Next step

Looking for a specific Komatsu model?

Send the model, the job and your destination — we reply with what is in stock, that unit's own FOB price, photos and a working video.

  • Reply within one working day
  • FOB China, or a CIF quote for your port
  • Inspection evidence before any payment