KOMATSUExcavator Export
Home/Models/PC160-7
10-20t class

Used Komatsu PC160-7 excavator

This is a 10-20t class Komatsu machine for export from China. Price follows the exact unit, not the model name.

22000-24500 USDindicative · per machine
10-20t classclass
Sourced to orderavailability
Worldwideshipping
Used Komatsu PC160-7 excavator for export from China

I check PC160-7 when the job is too heavy for a small 13-ton excavator, but still does not justify moving into full PC200 cost. It fits rural jobs, township construction, trenching, farm roads, small-to-medium earthmoving, dealer resale and rental buyers who need a stronger middle-size machine.

It is better for scattered jobs, farm roads, trenching and small earthmoving where the machine moves between tasks, not for one large pit loading trucks all day.

We usually keep around two PC160-7 machines available. Because this model is older, most units are repainted or prepared for resale. Undercarriage is usually renewed before sale, and steel tracks are common. If the buyer needs rubber pads on steel shoes, breaker line, breaker, grab or other attachments, we can discuss them before loading.

PC160-7 is an older direct-injection model, so it can make sense for markets where traditional repair support matters more than electronic management. It is not the best choice for strict Tier 3 emission markets, very narrow city sites, long-term heavy loading, large construction projects or frequent breaker-heavy work.

Before deposit, ask for the exact-machine video. Focus on cold start, smoke, engine sound, hydraulic response, both-side travel, swing, steel tracks, undercarriage, final drive area, boom foot, bucket linkage, leakage, machine plate and loading proof. New paint is useful for resale, but it does not replace a real walking and hydraulic test.

Final Komatsu PC160-7 specs should follow the current machine, model plate, engine plate and actual configuration. As a common reference, PC160-7 is often listed as a 16-ton class crawler excavator with Komatsu SAA4D102E-2 direct-injection engine, around 82.4 kW rated power, about 16,500 kg operating weight and around 0.65 m³ standard bucket configuration. Track width, bucket, blade, attachments and transport size may vary by machine.

Which specs do we confirm on the machine?

Model Version
Confirm PC160-7 by real machine plate
Operating Weight
Common reference around 16,500 kg; final weight depends on configuration
Engine / Power
Common reference SAA4D102E-2, around 82.4 kW / 2200 rpm
Bucket Setup
Common reference around 0.65 m³ bucket; larger bucket depends on real setup
Hydraulic System
Check boom, arm, bucket, swing and combined movement
Travel System
Check both-side travel, turning, straight travel and final drive area
Undercarriage
Check renewed or current rollers, sprocket, idler, track adjuster and track shoes
Attachments
Confirm breaker line, breaker, grab, bucket or other attachments before quotation
Transport Size
Confirm width, height, loading method and destination port limits

What do we check before we quote?

Engine

Cold start, smoke, idle stability, blow-by and engine plate.

Hydraulics

Boom, arm, bucket, combined movements and pump response.

Swing & travel

Both-side travel, straight walking and final-drive area.

Undercarriage & structure

Chain, shoes, rollers, sprocket, idler, pins and welds.

Where the PC160-7 fits

Best for
General earthmoving, road work, trenching, truck loading.
Check first
Undercarriage, hydraulics, engine smoke and structure — not paint or hours alone.
Before booking
Confirm transport width, height and the loading method for your port.

Related questions

How does the 10-20t class compare?

Indicative FOB — the exact price follows the unit, not the model name.

ModelWorking classIndicative FOBAvailability
PC11010-20t classon requestSourced to order
PC110-710-20t classon requestSourced to order
PC120-610-20t classon requestSourced to order
PC120-810-20t classon requestSourced to order
PC12810-20t classon requestSourced to order
PC128US-810-20t classon requestSourced to order
PC130-11M010-20t classon requestSourced to order
PC130-710-20t class20000-22000 USDSourced to order
PC130-810-20t class22000-24000USDSourced to order
PC138US-710-20t classon requestSourced to order

Other 10-20t class Komatsu

FAQ

Do you have a used Komatsu PC160-7 in stock?
Availability changes weekly. We hold and source Komatsu PC160-7 units and send the latest exact-machine photos and video before quotation.
What does a used Komatsu PC160-7 cost?
Current PC160-7 indicatively starts around 22000-24500 USD. Year, hours, undercarriage and hydraulic condition drive the final FOB number.
Which markets do you ship a Komatsu PC160-7 to?
We quote and ship worldwide, including Africa, the Middle East, Central Asia, South and South-East Asia and Latin America.
Next step

Looking for a specific Komatsu model?

Send the model, the job and your destination — we reply with what is in stock, that unit's own FOB price, photos and a working video.

  • Reply within one working day
  • FOB China, or a CIF quote for your port
  • Inspection evidence before any payment